Which Direction Do You Use A File?

What are the 5 basic filing systems?

Five basic filing steps are: Conditioning, Releasing, Indexing and Coding sorting.

1.

Conditioning; Removing all pins, brads, and paper clips; Stapling related papers together; Attaching clippings or items smaller than page-size to a regular sheet of paper with rubber cement or tape.

2..

What is done when using a file for cross filing?

Technique 1: Cross Filing Also called straightforward filing, this technique involves pushing the file across the edge of the material. It can be used for finishing, shaping or sharpening. This is the most commonly used filing technique.

What are the 3 types of filing systems?

Most Common Filing Systems Filing and classification systems fall into three main types: alphabetical, numeric and alphanumeric. Each of these types of filing systems has advantages and disadvantages, depending on the information being filed and classified.

What is applied to prevent clogging or pinning a file?

Rub a piece of standard chalk along the teeth of the file before using it on the work piece. The coating will help to keep the file from clogging up. Metal files are a workshop staple.

What are the different types of files?

6 Different Types of Files and How to Use ThemJPEG (Joint Photographic Experts Group) … PNG (Portable Network Graphics) … GIF (Graphics Interchange Format) … PDF (Portable Document Format) … SVG (Scalable Vector Graphics) … MP4 (Moving Picture Experts Group)

What are the four common types of files?

The four common types of files are document, worksheet, database and presentation files.

What is grade of a file?

Grade or cut – files are graded according to the size and spacing of cutting teeth. … bastard – is a course file for roughing down work to a general shape where a good finish is not required.

What is convexity of file?

Convexity of Files This enables the file to be forced into the metal sufficiently for the teeth to bite, and thus avoids dulling the teeth, which always occurs when the file is allowed to glide over the work without sufficient cutting.

Which file is having rows of teeth cut in one direction?

Single-cut files have rows of teeth cut in one direction only — usually at a 65-degree angle to the center line. Double-cut files have teeth that crisscross at opposing angles. The teeth form a diamond pattern across the face of the tool.

Which file is used for filing wood and leather?

Four-In-Hand Rasps are designed for filing both flat and curved surfaces in soft metals, wood, plastics, and leather. They are used primarily by woodworkers, shoe repairmen, and leather craftsman.

How are files classified?

Files are classified according to their cross-sectional shapes, the form of the cutting edges, and the coarseness of the cut (i.e., the number of teeth per inch or centimetre). … There are three general classifications of tooth form: single-cut, double-cut, and rasp.

What are the two most common filing techniques?

You have two basic methods: straight filing and draw filing.

What is a file and types of files?

A collection of data or information that has a name, called the filename. Almost all information stored in a computer must be in a file. There are many different types of files: data files, text files , program files, directory files, and so on. … For example, program files store programs, whereas text files store text.